This refrigerant has been prepared by mxing R32 +R125 + R143a + R134a in their mass percentages of 15 + 25 + 10 + 50 respectively. It belongs to HFC group of refrigerants. Its ODP is zero and GWP is 2000. It is neither toxic nor flammable. Therefore it comes under the safety class of Al. Its boiling point at atmospheric pressure is —42.7°C. It is mixable with polyolester oils. Therefore, after drawing out mineral or alkybenzene oil from the compressor, new polyolester (POE) oil should be charged. Mineral oil can also be used with R427A machine if an oil separator may be fitted with this machine. This refrigerant can be replaced in R22 refrigerant machine without making any special change.
Thursday, 11 January 2018
More Info
-
Compressor can be calculated as follows:- Where:- V = Volume in cubic feet. D = Diameter of cylinder in inches. S = Length o...
-
in 3 easy steps use the formula: - 1. common and start is equal to medium value 2. start and running is equal to high...
-
Q. What are the parts which divide the refrigeration system into low pressure side and high pressure side ? Ans. Refrigerant c...
-
For retrofitting of R 22 machine with R 427 A proceed as under : 1. Start the machine charged with R 22 and note its temperatures and press...
-
Ans :- Hydrogen, Fluorine, and Carbon this is two tipe of gas mix which are R32 and R125 Physical properties of R-410A re...
0 comments:
Post a Comment