The liquid level falls below the normal level in the float housing, the float ball comes down pulls the needle from its seat and allows the liquid refrigerant to enter into the float housing and evaporator. As soon as the liquid level rises, it carries the float ball to the proper height which helps the needle to go back to its seat and prevents further entry of liquid.
Saturday, 20 January 2018
More Info
-
For retrofitting of R 22 machine with R 427 A proceed as under : 1. Start the machine charged with R 22 and note its temperatures and press...
-
Suction pressure . It is the absolute pressure of refrigerant at the inlet of a compressor. Discharge pressure. It is the absolute ...
-
1 Ton AC for 100 sq. foot room 1 Ton AC sufficient for 100 sq. To 120 sq. foot room 1.5 Ton AC sufficient 150 sq.foot 1.5 Ton A...
-
When the compressor and motor operate on the same shaft and are enclosed in a common casing, they are known as hermetic sealed compressors...
-
R-22 Standing pressure - 150 PSI Saction pressure - 60 TO 70 PSI Discha...
0 comments:
Post a Comment