This refrigerant has been prepared by mixing R32 + R125 in equal quantity. It belongs to HFC group of refrigerants. Its ODP is zero and GWP is 1800. It is neither toxic nor flammable. Therefore it comes under the safety class of Al. Its boiling point at atmospheric pressure is —52.7°C. It is mixable with polyolester (POE) oil. As it catches the moisture rapidly from the air, therefore it may be noticed that it may not come in contact with air while charging it into the machine. This refrigerant was prepared for the replacement of R22 gas but due to its less cooling capacity and extremely high working pressures, it could not be successful. Therefore it has been used only in those machines which specially have been designed for this refrigerant.
Thursday, 11 January 2018
More Info
-
This refrigerant has been prepared by mxing R32 +R125 + R143a + R134a in their mass percentages of 15 + 25 + 10 + 50 respectively. It belon...
-
The float valve controls are of two types. One is low side float control and the other is high side float. This type of control is used in ...
-
L R A ( Lock Rotor Amps ) If L R A Mansion in your compressor. How we know the ton of the compressor:- ANS:- It's Simple p...
-
For retrofitting of R 22 machine with R 427 A proceed as under : 1. Start the machine charged with R 22 and note its temperatures and press...
-
Ans :- Hydrogen, Fluorine, and Carbon this is two tipe of gas mix which are R32 and R125 Physical properties of R-410A re...

0 comments:
Post a Comment